Answer Question
Ok I bought it but can't attach it.
It came with 2 shorter thicker bolts (each with 1 large washer) and 2 half-threaded longer thinner bolts (each with 2 smaller washers and 1 nut). Only the thinner bolts will fit through the slot in the R2 clamp holder bar so I assume you have to use those and have no clue why there are 2 shorter thicker bolts as there are only 2 holes you can use on the Kakbritva wide clamp and the gearconnect adaptor.Ok so when you use the longer bolts that actually fit in the R2 clamp holder slot, they don't poke through at all for the nut to secure the setup. If I don't use any washers at all (which looks like the bolt head would damage the back of R2 clamp slot), then the bolt comes through enough to thread the nut on by maybe 1 thread.Now if I were to take the Kakbritva clamp bar off and just use the two gearconnect bolts to hold everything together, I would probably be able to use the washers but then it would be 5/8th inch shorter than the R2 universal angled clamps.There aren't any instructions or pictures in the box and I couldn't find anything about it online.Unless I'm just thinking about this wrong, there is no way to use this adapter with the R2 stock clamps.Any ideas? I have pictures but can't see any way of uploading them here.
TEXT
Uploading file and scanning for virus...
Please Wait