Browse by Product
No matches to display.
Answer Question
Slight Angle Difference with the Axicube From One Side To The Other
I have the TSPROF K03 Hunter package. When I set the angle with the Axicube, the angle on the second side of the knife varies consistently by .2 degrees. For example, on side "A", I get a reading of 15.0 degrees. When I flip the blade over to side "B", I get a reading of 15.2 degrees.
I would think that I should get the same reading of 15.0 degrees on both sides and thought this was how it was designed.
This is consistent from one knife and setup to another. The Axicube has been properly calibrated to the 14.0 degrees and when I check the angles, I make sure it is on the same part of the knife blades from one side to another.
Has anyone else experienced this? Could there be an issue with the Axicube? Do the clamps or arm the clamps are attached to need to be calibrated somehow?
Thanks, GR
I would think that I should get the same reading of 15.0 degrees on both sides and thought this was how it was designed.
This is consistent from one knife and setup to another. The Axicube has been properly calibrated to the 14.0 degrees and when I check the angles, I make sure it is on the same part of the knife blades from one side to another.
Has anyone else experienced this? Could there be an issue with the Axicube? Do the clamps or arm the clamps are attached to need to be calibrated somehow?
Thanks, GR
