Question 1

Guest

Trying to figure out the difference between Hapstone RS Black and the R2 black?

Asked 1 year ago 1 answer

Reinforced Vertical Rod for Haptone R2 & V8

Question 2

Guest

Fine cowhide strop cleaning?

Asked 1 year ago 1 answer

Fine Cowhide Leather Strop on Anodized Blank [6" x 1"]

Question 3

Tsprof lists an Axicube rev.2 and a rev.3. What is the difference?

Asked 1 year ago 2 answers

Измеритель угла заточки Axicube One

Question 4

Guest

TSPROF pioneer extra clamps and clamp frame.

Asked 1 year ago 1 answer

TSProf Pioneer Knife Sharpener

Question 5

How does the pioneer thickness compensator work?

Asked 1 year ago 1 answer

Thickness Compensator for Pioneer [8 mm]

Question 6

Guest

Do the Shapton Pros contain silicon carbide in addition to the aluminum oxide? If yes for which grits if not all?

Asked 1 year ago 1 answer

Shapton Pro (Kuromaku) Stone [6" x 1"]

Question 7

Guest

Kadet Pro

Asked 1 year ago 1 answer

Boride CS-HD Narrow Stone [6" x ½"]

Question 8

tarn

Does the TSPROF K03 Pro BLACK kit contain standard clamps? Additional questions...

Asked 1 year ago 1 answer

TSProf K03 PRO [BLACK] Knife Sharpener

Question 9

Guest

over tightening set screw on original holder dents it making it unusable. Does the new holder have the same issue?

Asked 1 year ago 1 answer

Advanced Stone Holder with Linear Bearing for Hapstone RS and Work Sharp PPA

Question 10

Guest

What are the benefits of this versus the RS regular sharpening arm bar?

Asked 1 year ago 1 answer

Advanced Stone Holder with Linear Bearing for Hapstone RS and Work Sharp PPA

Question 11

Guest

Do these clamps come with the thumb screws.

Asked 1 year ago 1 answer

Kadet Whole Milled Clamps

Question 12

Guest

Just got K03 pro hunter, want to get the mount, i have no Idea what material is the height adjuster, how to check?

Asked 1 year ago 1 answer

Lightbringer Mount for TSPROF K03 PRO

Question 13

Guest

Will this work with my 4in venev stones

Asked 1 year ago 1 answer

⚔️Sharpening Systems > Hapstone RS Knife Sharpener

Question 14

Guest

Can you use the whole stone with the hapstone attachment this only let's you use 3 out of 6 inch of the stone

Asked 1 year ago 1 answer

6" Stone Holder for Work Sharp Professional Precision Adjust

Question 15

Looking at the Wobble-Free Tapered Pivot and half the reiews mention broken off threaded parts. Has this been fixed?

Asked 1 year ago 1 answer

Wobble-Free Tapered Pivot for Wooden Base of KME

Question 16

Guest

Oak, Adler or Beechwood? Witch is the best for polishing, and why?

Asked 1 year ago 1 answer

Oak Strop on Anodized Blank [6" x 1"]

Question 17

Guest

What is this? Why is it so cheap?

Asked 1 year ago 1 answer

Venev Diamond Stropping Paste in Lip Balm Tube

Question 18

Guest

What is included with this

Asked 1 year ago 1 answer

TSProf K03 Expert Knife Sharpener

Question 19

Guest

Does this kit come with the upgraded height adjuster?

Asked 1 year ago 1 answer

TSProf K03 PRO [BLACK] Knife Sharpener

Question 20

Guest

Both Precision Adjust elite Sharpeners

Asked 1 year ago 1 answer

Vijim Vl66 LED -Licht

Question 21

Guest

Can your Shapton Pro stones be used with the Edge Pro Apex?

Asked 1 year ago 1 answer

Shapton Pro (Kuromaku) Stone [6" x 1"]

Question 22

Guest

What size is this screw knob for the K03 Pro Whole Milled clamps? It’s larger in diameter than any other screw knob.

Asked 1 year ago 1 answer

Thumbscrew M5x30

Question 23

Guest

What size for tsprof pioneer?

Asked 1 year ago 1 answer

TSProf Pioneer Knife Sharpener

Question 24

Guest

Toohr

Asked 1 year ago 1 answer

Wide Central Slit Clamp for KakBritva

Question 25

Guest

Won't the Optimal Diamond stones be attracted to the magnets in the table?

Asked 1 year ago 1 answer

⚔️Sharpening Systems > Hapstone V8 Standard Knife Sharpener

Question 26

Guest

Do these stones ever need to be "flattened"? Do they require cleaning? If so, what's a good method? Thanks!

Asked 2 years ago 1 answer

TSProf Diamond Plate Stone Set [6" x 1"]

Question 27

Guest

are these for the gunny cloths? and if so what size?

Asked 2 years ago 1 answer

Anodized Aluminum Blank [160 x 25 x 3mm] [6" x 1"]

Question 28

Guest

is this the hard backing for the gunny cloths?

Asked 2 years ago 1 answer

Empty Aluminum Blank 6" [6" x 1"]

Question 29

Guest

Does the L Adapter come with the shorter black clamps like in the photos..?

Asked 2 years ago 1 answer

L-Adapters for K03 and Kadet Clamps

Question 30

Guest

Will the Kazak Scissor Holder Fit on a Hapstone K1 with Slot Opening of 8mm?

Asked 2 years ago 1 answer

Guided sharpening systems

Question 31

Guest

Is the top surface on these shorter than the 3mm blanks because the bevel is longer?

Asked 3 years ago 1 answer

Anodized Aluminum Blank [160 x 25 x 5mm] [6" x 1"]

Question 32

Guest

What kind of stone do you recommend as a cleaning stone for these dragon stones

Asked 3 years ago 1 answer

Venev Dragon Series Dual Side Diamond [8" x 3"]

Question 33

Guest

Any idea on a restock? I prefer to support local if possible and y’all are just over an hour away.

Asked 3 years ago 1 answer

Thickness Compensator for KME

Question 34

Rat

Can I use oil with these stones? I see people using oil on YT. Some say its better especially with the OCB stones?

Asked 3 years ago 1 answer

Venev Ursa Series Dual Side Diamond Stone Set [6" x 0.6"]

Question 35

Guest

When will these be back in stock?

Asked 3 years ago 1 answer

Wobble-Free Tapered Pivot for Wooden Base of KME

Question 36

Guest

I have a K03. Is the single clamp best for paring knives and small pocket knives?

Asked 3 years ago 1 answer

K03 Single Clamp

Question 37

Guest

Is this item ready to be shipped? And is is shipping from russia?

Asked 3 years ago 1 answer

K03 Single Fillet Clamp

Question 38

Guest

Will these stones fit a Ruixin Pro? Mine has an adjustable holder that will accept 6"stones.

Asked 3 years ago 1 answer

TSProf Diamond Plate Stone Set [6" x 1"]

Question 39

Guest

Will these fit and work with the Ruixin Pro? If not what would be the best multi purpose stones to buy?

Asked 3 years ago 1 answer

Venev Ursa Series Dual Side Diamond Stone Set [6" x 0.6"]

Question 40

AMBOSHER

I currently have S30V M390 20CV D2 CruWear and Maxamet steel knives. Would it be fine to use CS-HD on all of them?

Asked 3 years ago 1 answer

Boride CS-HD Stone [6" x 1"]

Question 41

Guest

what is diameter of hone? 10 and 12 inch.

Asked 3 years ago 1 answer

Idahone 10"-12" Fine Ceramic Honing Rod

Question 42

Guest

What is the difference between Rigel and Sirius..?

Asked 3 years ago 1 answer

Venev Orion Series Diamond Stone Set [6" x 1"]

Question 43

Guest

Why exactly will this not work with the Blitz 360 Pro..?

Asked 3 years ago 1 answer

Направляющая стержень PRO с угломером Axicube-I для TProf K03

Question 44

Guest

I attached my "Leading Edge Core upgrade for Work Sharp Precision Adjust" and all stones new/old rub xxxx ?

Asked 3 years ago 1 answer

Guided sharpening systems > Work Sharp Precision Adjust

Question 45

Guest

This is the new updated extended lift made of polymeric?

Asked 3 years ago 1 answer

TSProf K03 LITE Knife Sharpener

Question 46

Guest

Hi, do you recommend using this aluminium blank with the Gunny Cloth?

Asked 3 years ago 1 answer

Gunny Cloth Stropping Pad [6" x 1"]

Question 47

Guest

What do you recommend using to adhere the Gunny Cloth to the aluminium blank?

Asked 3 years ago 1 answer

Gunny Cloth Stropping Pad [6" x 1"]

Question 48

Guest

Could you please provide some additional information in the description about the use for each color. Thanks

Asked 3 years ago 1 answer

LUXOR Polishing Compound

Question 49

Guest

Which micron would you use following a 8000 grit wet stone?

Asked 3 years ago 1 answer

Gunny Juice Poly Diamond Suspension

Question 50

Guest

Are the KME “form-factor” stones made from diamond or some other “non-diamond” material?

Asked 3 years ago 1 answer

4" Stone Holder for Lansky

Browse by Product

Browse by Topic

Tools