Question 1

Guest

which honing oil would be good for kangaroo leather

Asked 3 months ago 1 answer

💎6" Stones and Strops > Kangaroo Leather Strop [6" x 1" PPA]

Question 2

Guest

What is the center to center distance of the holes in the adapter? 20mm?

Asked 4 months ago 1 answer

KakBritva Wide Central Clamp Adapter for Work Sharp Precision Adjust

Question 3

Guest

Are these stones really that good?

Asked 4 months ago 1 answer

Алмазная пластина TProf (4 шт.), набор камней [6 x 1 дюйм]

Question 4

Guest

- Question - HOW are the samples opened??

Asked 4 months ago 1 answer

Venev Diamond Stropping Compound Sampler, 8 Grits

Question 5

Guest

What scale/column on the Gritomatic Abrasives in Micron Scale do the KME Gold Series diamond hone stones use?

Asked 4 months ago 1 answer

Jende Resin Bonded Diamond [6" x 1"]

Question 6

Guest

will the idahone ceramic stones fit the TSPROF sharpener?

Asked 4 months ago 1 answer

Idahone Ceramic Stone [6" x 1"]

Question 7

Guest

I don't understand what I need to make this work properly. Looks like you have an extended blade clamp that is not

Asked 4 months ago 1 answer

6" Stone Holder for Work Sharp Precision Adjust

Question 8

Guest

What are the dimensions of the linear bearings. ID, OD, and Length.

Asked 4 months ago 1 answer

Advanced Stone Holder with Linear Bearing for Hapstone RS and Work Sharp PPA

Question 9

Guest

Will this work on a stone that is slightly smaller than 6 inches

Asked 4 months ago 1 answer

6" Stone Holder for Work Sharp Precision Adjust

Question 10

Guest

Hi, can i ask how much this titanium guide rod weighs? in comparison to the original included guide rod

Asked 4 months ago 1 answer

K03 PRO Full Titanium Guide Rod

Question 11

Guest

Does this come with Tsprof stones?

Asked 4 months ago 1 answer

TSProf Pioneer Knife Sharpener

Question 12

Guest

Does this come with the TSprof stones?

Asked 4 months ago 1 answer

TSProf Pioneer+Stand Knife Sharpener

Question 13

Guest

Will these work with Ruixin sharpeners?

Asked 4 months ago 1 answer

Shapton RockStar Stone [6" x 1"]

Question 14

Guest

Will different thicknesses of stone change the angle?

Asked 5 months ago 1 answer

4" Stone Holder for Lansky

Question 15

Guest

Is this K03 body available with without rack and pinion lift? Only rotating module and frame.

Asked 5 months ago 1 answer

Expert Body with Extended Angle for TSProf K03

Question 16

Guest

Will this work in a TSProf Kadet Pro? Does it need adapters/backings?

Asked 5 months ago 1 answer

Shapton RockStar Stone [6" x 1"]

Question 17

Guest

Do these come with the StroppyStuff emulsion already on them?

Asked 5 months ago 1 answer

Multi-Color Strop Set - Fine Cowhide Leather for StroppyStuff [6" x 1"]

Question 18

Guest

Grit 120

Asked 5 months ago 1 answer

Hapstone Premium CBN Stone [6" x 1"]

Question 19

Guest

Will these fit the Planeshift Clamps Upgrade for Work Sharp Professional Precision Adjust?

Asked 5 months ago 1 answer

Universal Angled Clamps for Hapstone R2

Question 20

Guest

Will my Edge Pro Diamond Matrix Stones work with the Jende JIGS 2.0 Knife Sharpener?

Asked 5 months ago 1 answer

⚔️Sharpening Systems > Точилка для ножей Jende JIGS 2.0

Question 21

Guest

Is this for the Planeshift clamp?

Asked 5 months ago 1 answer

Planeshift Clamps Upgrade for Work Sharp Professional Precision Adjust

Question 22

Guest

What size stones does it fit?

Asked 5 months ago 1 answer

Hapstone RS Knife Sharpener

Question 23

Guest

Will this work on other sharpening systems?

Asked 5 months ago 1 answer

Scissors Attachment for KME

Question 24

Guest

New to Knife sharpening what exactly is this used for?

Asked 5 months ago 1 answer

Adjustable Convex Adapter for Hapstone R2 & V8 [6 mm]

Question 25

Guest

How do I specifically dry these after washing with water? Will just wiping with cloth be enough? Will it rust?

Asked 5 months ago 1 answer

Hapstone Premium Diamond Stone [6" x 1"]

Question 26

Guest

Will this work with the kadet pro 6mm rod?

Asked 6 months ago 1 answer

Axicube T2 Electronic Kinder

Question 27

Guest

Colors

Asked 6 months ago 1 answer

Venev Cerberus Dog Series Diamond à double côté [4 "x 0,6"]

Question 28

Guest

where does it show the grit?

Asked 6 months ago 1 answer

Dialux Stropping Paste

Question 29

Guest

Is this mainly for fillet knives and full flat ground knives ?

Asked 6 months ago 1 answer

Extendable Magnetic Table (V8 Module)

Question 30

Guest

Will these work on ws place sharing handle

Asked 6 months ago 1 answer

Venev Centaur Series Dual Side Diamond Stone Set [6" x 1"]

Question 31

Guest

Color coded plates

Asked 6 months ago 1 answer

Nanocloth Strop [4" x 1"]

Question 32

Guest

Are these the exact same that Jende sells on their website (honeycomb face)? Or does Jende just make these for u?

Asked 6 months ago 1 answer

Nanocloth Strop [4" x 1"]

Question 33

Guest

I cant find good stones to use, nothing i try slides like the spyderco stones, it just digs in... any advice?

Asked 6 months ago 1 answer

Leading Edge V-Sharpener

Question 34

Guest

How are these compared to resin bonded stones

Asked 6 months ago 1 answer

Hapstone Premium Diamond Stone [6" x 1"]

Question 35

Guest

what is a good way to clean these stones?

Asked 6 months ago 1 answer

Hapstone Premium Diamond Stone [6" x 1"]

Question 36

Guest

Are all of hapstones clamps compatible with this upgrade? Or just rs clamps or just r2 clamps

Asked 6 months ago 1 answer

Planeshift Clamps Upgrade for Work Sharp Professional Precision Adjust

Question 37

Guest

is there an adhesive to attach a strop or what should i use to adhere it

Asked 6 months ago 1 answer

Анодований алюмінієвий порожній [160 x 25 x 5 мм] [6 "x 1"]

Question 38

Guest

Fine Tuning Adaptor w/ Rail Height Adjuster

Asked 7 months ago 1 answer

Rail Height Adjuster for Hapstone R2

Question 39

Guest

Does this come as part of the R2 Black Edition, or is this a separate add-on?

Asked 7 months ago 1 answer

Rotating Clamp Module (R2 Module)

Question 40

Guest

My finest diamond stone is 1000 grit . What size ceramic stone do you recommend between 800grit,2000grit or3000 ?

Asked 7 months ago 1 answer

Sharpening stones and stropping

Question 41

Guest

Grit comparison

Asked 7 months ago 1 answer

Venev Centaur Series Dual Side Diamond [6" x 1"]

Question 42

tarn

Does the TSPROF K03 Pro BLACK kit contain standard clamps? Additional questions...

Asked 1 year ago 1 answer

TSProf K03 PRO [BLACK] Knife Sharpener

Question 43

Guest

over tightening set screw on original holder dents it making it unusable. Does the new holder have the same issue?

Asked 1 year ago 1 answer

Advanced Stone Holder with Linear Bearing for Hapstone RS and Work Sharp PPA

Question 44

Guest

What are the benefits of this versus the RS regular sharpening arm bar?

Asked 1 year ago 1 answer

Advanced Stone Holder with Linear Bearing for Hapstone RS and Work Sharp PPA

Question 45

Guest

Do these clamps come with the thumb screws.

Asked 1 year ago 1 answer

Kadet Whole Milled Clamps

Question 46

Guest

Just got K03 pro hunter, want to get the mount, i have no Idea what material is the height adjuster, how to check?

Asked 1 year ago 1 answer

Lightbringer Mount for TSPROF K03 PRO

Question 47

Guest

Will this work with my 4in venev stones

Asked 1 year ago 1 answer

Hapstone RS Knife Sharpener

Question 48

Guest

Can you use the whole stone with the hapstone attachment this only let's you use 3 out of 6 inch of the stone

Asked 1 year ago 1 answer

6" Stone Holder for Work Sharp Professional Precision Adjust

Question 49

Looking at the Wobble-Free Tapered Pivot and half the reiews mention broken off threaded parts. Has this been fixed?

Asked 1 year ago 1 answer

Wobble-Free Tapered Pivot for Wooden Base of KME

Question 50

Guest

Oak, Adler or Beechwood? Witch is the best for polishing, and why?

Asked 1 year ago 1 answer

Oak Strop on Anodized Blank [6" x 1"]

Browse by Product

Browse by Topic

Tools